Oak Veneer Chipboard
On the shop floor: edges crack after cutting, cores sink under load, color jumps between panels.
Why it happens-mixed chip size, low face density, short press, random veneer lay-up.
We lock it down. Three-layer chip structure: fine surface layer, coarse core. Density kept at 620–700 kg/m³. No light spots.
Moisture before press 6–8%. Press cycle fixed: 1.0–1.2 MPa, 115–125°C. Full time. No shortcut.
Veneer sorted by tone and grain. Lay-up in sequence. Pre-sand to ±0.25 mm.
What you get-edges stay intact on routing, no sink on screw fixing, panels match in one batch. Cut. Band. Assemble. Fewer rejects.
Key Features
Three-layer chip structure
Density control 620–700 kg/m³
Full press cycle, no short press
Veneer tone sorting before lay-up
Thickness tolerance ±0.25 mm
Stable edge during CNC cutting
Product Details
Product Specification
| Species | Natural Oak Veneer / Particleboard Core |
| Packaging | Pallet + corner guard + film |
| Standard Size | 1220×2440mm |
| Thickness | 12–25mm |
| MOQ | 1×40HQ |
| Certification | FSC / CARB P2 |
| Moisture Content | 6–10% |
| Glue Grade | E0 / E1 |
| Density | 620–700 kg/m³ |
| Formaldehyde Emission | ≤0.5 mg/L |
| Surface | Oak Veneer Double Side |
| Monthly Capacity | 9,000 m³ |
Application
FAQ
Q: Edge cracks after CNC
A: Check face density. We run fine chips on surface
Q: Panels don't match in color
A: Stick to one batch. Veneer is pre-sorted
Q: Core sinks on screw fixing
A: Density held at 620–700 kg/m³
Q: Veneer lifts after edge banding
A: Full press cycle prevents weak bonding
Q: Ready for drilling lines
A: Yes. Stable core, less breakout
Q: Oak Veneer Chipboard runs with batch control.
A: Use Oak Veneer Chipboard where cost and machining stability need to balance.
Hot Tags: oak veneer chipboard, China oak veneer chipboard manufacturers, suppliers, factory
