Fancy Plywood
On site issues show quick. Veneer splits on edges. Panels wave after cutting. Finish picks up glue marks.
Why-core gaps, low pressure, mixed veneer grades.
We fix it step by step. Core lay-up in odd plies, 9–13 layers, cross direction. No voids in face zone.
Moisture set 8–10% before press. Hot press at 1.2–1.4 MPa, 120–135°C. Full cycle. Don't short it.
Face veneer sorted by grade and color. Same bundle per run. Pre-sand to ±0.2 mm.
Result-panels stay flat after CNC. Edges hold. Finish goes on clean, no bleed lines. Less patching, faster throughput.
Key Features
9–13 ply cross construction
Press pressure 1.2–1.4 MPa
Face veneer grading by batch
Thickness tolerance ±0.2 mm
Reduced glue bleed on surface
Stable panel for coating lines
Product Details
Product Specification
| Species | Natural Veneer / Hardwood Core |
| Packaging | Pallet + corner guard + film |
| Standard Size | 1220×2440mm |
| Thickness | 9–25mm |
| MOQ | 1×40HQ |
| Certification | FSC / CARB P2 |
| Moisture Content | 8–12% |
| Glue Grade | E0 / E1 |
| Density | 520–650 kg/m³ |
| Formaldehyde Emission | ≤0.5 mg/L |
| Core | Hardwood Multi-ply |
| Monthly Capacity | 8,500 m³ |
Application
FAQ
Q: Veneer cracks on cutting
A: Use cross plies. We build 9–13 layers
Q: Panels warp after machining
A: Moisture set 8–10% before press
Q: Glue marks after finishing
A: Full press cycle avoids bleed
Q: Color not consistent
A: Run same veneer batch
Q: OK for lacquer line
A: Yes. Flat to ±0.2 mm
Q: Fancy Plywood runs on fixed press cycles and graded veneer.
A: Use Fancy Plywood when finish quality and panel flatness are both critical.
Hot Tags: fancy plywood, China fancy plywood manufacturers, suppliers, factory
