Cylindrical Wooden Sticks
You've seen it-rods curve after a few days, diameters jump between batches, drilling leaves fuzz. That's wet stock, mixed logs, loose turning.
We don't run it that way. Kiln first, 65–75°C cycles. MC down to 8–10% before machining.
Cut blanks. Then CNC turning. Tool wear monitored. Diameter locked at ±0.1 mm on key sizes.
Sort by grain. No cross-grain mix. Straightness checked-≤1/1000.
Sand after turning. 180–220 grit belts. Take off tear-out, keep edges clean.
Result-press-fit stays consistent, drilling stays clean, auto-feeders don't jam. Less rework. Faster throughput.
Key Features
MC 8–10% before turning
Diameter tolerance ±0.1 mm (critical sizes)
CNC lathe, tool wear control
Straightness ≤1/1000
180–220 grit sanding finish
Grain sorting, batch consistency
Product Details
Product Specification
| Species | Birch / Poplar / Pine |
| Packaging | Bundled + carton + pallet |
| Standard Size | Dia 6–38mm, Length 120–900mm |
| MOQ | 1×20GP |
| Certification | FSC |
| Moisture Content | 8–12% |
| Glue Grade | E0 (if finger-jointed) |
| Density | 480–680 kg/m³ |
| Tolerance | ±0.1–0.15 mm |
| Straightness | ≤1/1000 |
| Surface | Sanded, ready to use |
| Monthly Capacity | 900,000 pcs |
Application
FAQ
Q: Why rods bend in storage
A: MC too high. We kiln to 8–10% before turning
Q: How you hold diameter
A: CNC + tool check per shift. ±0.1 mm on key specs
Q: Drilling leaves rough edges
A: Post-sanding 180–220 grit fixes that
Q: Ends cracking
A: Controlled drying cycle reduces stress
Q: Can it run on auto lines
A: Yes. Straight rods, stable size. Load and go
Q: Cylindrical Wooden Sticks shipped with batch reports.
A: Use Cylindrical Wooden Sticks where tolerance and feeding stability matter.
Hot Tags: cylindrical wooden sticks, China cylindrical wooden sticks manufacturers, suppliers, factory, mdf wood sticks, dowel wood sticks, thick wooden sticks, wooden sticks for decoration, round wood stick, coloured wooden sticks
