Cylinder Wood Stick
Shop-floor issues are obvious. Rods bend after storage. Diameter jumps, parts don't fit. Surface tears during drilling.
Why-high MC, mixed lumber, loose turning tolerance.
We control it upstream. Kiln dry to 8–10% MC. No wet stock into machining.
Cut to blanks, then CNC turning. Diameter held at ±0.1–0.2 mm. Check every batch.
Grain direction sorted. No cross-grain pieces in one lot. Straightness spec ≤1/1000.
After turning-belt sanding, 180–240 grit. Remove tear-out, keep surface even.
Result-consistent fit for dowels and joints, straight rods for auto-feeding, less sanding on your side. Load it. Drill it. Assemble it.
Key Features
MC control 8–10% before turning
Diameter tolerance ±0.1–0.2 mm
CNC lathe, repeatable output
Straightness ≤1/1000 per batch
180–240 grit sanding finish
Sorted grain, fewer defects
Product Details
Specifications
| Species | Birch / Pine / Beech |
| Packaging | Bundle + carton + pallet |
| Standard Size | Dia 6–50mm, Length 100–1200mm |
| MOQ | 1×20GP |
| Certification | FSC |
| Moisture Content | 8–12% |
| Glue Grade | E0 (if laminated) |
| Density | 500–720 kg/m³ |
| Straightness | ≤1/1000 |
| Surface | Sanded smooth |
| Tolerance | ±0.1–0.2 mm |
| Monthly Capacity | 1,200,000 pcs |
Application
FAQ
Q: Rods bend in warehouse
A: Dry to 8–10% before machining
Q: Diameter out of spec
A: CNC turning holds ±0.1–0.2 mm
Q: Surface tears when drilling
A: Sanded 180–240 grit after turning
Q: End cracks
A: Controlled kiln schedule reduces stress
Q: Fit for auto assembly
A: Yes. Straight rods, stable size
Q: Cylinder Wood Stick shipped with batch checks.
A: Use Cylinder Wood Stick when fit tolerance and straightness drive your yield.
Hot Tags: cylinder wood stick, China cylinder wood stick manufacturers, suppliers, factory
